Wireless charging bracket product
A, q: mobile phone charging fault
To understand the problem of mobile phone charging, first understand the technical parameters of the stent
Input parameters of wireless charging bracket:
Rated voltage input range: DC 4.75V-5.25V
Rated input current range: DC 1.5a-2.0a
Note: if the power supply input current of the bracket is less than 1.5a, it will not start or stop working frequently, and there will be problems like "intermittent charging" or "no charging" or the mobile phone shows "may not support this accessory" and so on.
Problem phenomenon 1, intermittent charging
Problem phenomenon two, do not charge
Problem phenomenon 3, mobile phone display "may not support this accessory"
Q1. Whether the input car charger head/charger/car USB port you use meets the rated input requirements of the bracket
Q2. Is the car charger head/charger/car USB port that you are using easy to loose and cause poor contact
Q3. Is the car charger head/charger/car USB port plug you are using plugged in properly
A. charger problem: take the iphone charger as an example, the rated output of the iphone charger is DC 5V 1A, and its output current does not meet the power supply requirements of the bracket, so the iphone charger cannot be used as the power supply product of the bracket. The charger rated with standard DC 5V 2A output is used to solve the problem. Taking the DC 5V 2A charger standard for huawei mobile phone as an example, it can ensure the normal start and operation of the bracket.
A car charger head problem: get in the car market filling head there are A lot of output is DC 5 v 1 A, if the above problems the car charger head of output current amounted to less than 1.5 A, then change A standard output rated DC 5 v 2 A car charger head to solve the problem, the other in the process of driving vibration, easy to cause the car charger head loose turbulence note caused by poor contact car charger head of charging problem.
Answer 3: vehicle-mounted USB port problem: if the above charging problem occurs when the bracket connects the vehicle-mounted USB port, the rated output parameters of the vehicle-mounted USB port shall be understood first. If the output parameters of the vehicle-mounted USB port do not meet the input requirements of the bracket, the rated standard DC 5V 2A car charger head power supply shall be changed to solve the problem.
Answer 4. The above three power supply input methods are determined to meet the requirements of the product, or there is a charging problem.
1. Check whether the charging plug of the mobile phone cover is not plugged into the mobile phone charging port or not in place.
2. Mobile phone cover at the receiving end
3: launcher bracket problem. After all the above problems are eliminated, it may be the product itself of 2 and 3, and the product itself shall be returned to the manufacturer for replacement.
> Two, q: bracket easy to fall off the problem
Before understanding the problem of easy falling off of the stent, understand the correct way to install the stent
1. Before the bracket is installed, the installation position shall be determined. The inclined plane or horizontal plane and smooth surface shall be selected for installation, and the irregular surface shall not be installed;
2. After the installation position is determined, wipe the installation position clean with no. 1 wet alcohol cotton first, and dry the water with no. 2 dry alcohol cotton after cleaning. There must be no oil, dust, water and other foreign body residues;
3. Tear off the strong 3M adhesive paper on the base of the support, press the base of the support hard on the installation position, press the support hard to maintain the pressure around 60s, and make sure to keep the pressure around 60s before release;
4. After the bracket base is installed, it can be normally used for wireless charging after waiting for 2h. Do not use it immediately.
5. After the above installation steps are in place as required, the bracket can be guaranteed not to fall off during the use.
A: be sure to follow the detailed installation steps to install the bracket
Q: will the mounting position be damaged if the bracket is removed
Answer: no. Before removing the bracket, heat 3M adhesive to Microsoft state, and then tear it off. Soft adhesive products can be easily removed after heating (heating by hair dryer is available).
Q: will wireless charging affect your phone
Answer: no, this product has a full range of protection on the mobile phone, stable current and voltage protection, full power off charge protection, mobile phone cover with anti-magnetic tape (shielding magnetic field protection) on the mobile phone will not have any interference problems, can be used completely at ease
Q: can the built-in wireless receiver (e.g. Samsung S6/S7) directly use this wireless transmitter bracket
Answer: can't use directly, need to form a complete set special wireless receiving end cellular phone cover use
Q: how fast is the wireless charging speed? Can it be as fast as an ordinary charger?
A: take the iphone 7 as an example. The data from the laboratory test showed that the phone charged at 8-10% in 10 minutes without any operation
6. Q: will the power level drop when using navigation/listening to music/video during charging
Answer: can't, the electric quantity assurance rise don't drop
Q: when charging, will the product be hot?
Answer: it won't get hot. The product USES the special chip for wireless charging of the international famous brand (Texas instruments), and the loss is small and the heat is low when working. Coupled with the design of metal support, it ensures good temperature control
Q: what is the charging efficiency of the product?
Answer: the product USES the international famous brand (Texas instruments) dedicated chip for wireless charging, with high conversion efficiency. The charging efficiency measured in the laboratory is 75%
Q: will the product be radioactive? Is it harmful to human body?
Answer: no, the close range wireless charging products, no harm to human body, safe and assured use
Q: is it easy to drop your mobile phone while driving?
Answer: the product USES the magnet of special quality, the magnet product that has invention patent, magnetic force is strong, in addition the company has done 200 kilometers of driving test, all kinds of road conditions have been tested, did not fall off, the equipment has been used normally in many vehicles of the company for about two years, without falling off
Note: the domestic wireless charging base and wireless charging bracket have the same solution, the same magnetic suction design, which can solve the same problem as the bracket. Wireless charger
1. Description of the charger
1. When the charger is in use, first press the "on" button to open the charger, then align the receiver ring of the mobile phone cover on the transmitter ring of the wireless transmitter of the charger, and then start charging after the wireless charging indicator sound of the charger drops
2. Open the charger and press the switch button; Close the charger and press the switch button twice in quick succession; Turn on the flashlight light, long press the switch button; Turn off the flashlight light, long press the switch button or press the switch button twice quickly; To charge the phone with USB charging cable, you need to press the button to open the charging button (no prompt sound).
3. There are four LED indicators on the charging cabinet, three blue LED indicators and one blue and red LED indicator. The blue light indicates the electric quantity and the red light indicates the wireless emission work
Second, question and answer
1. Q: no charging phenomenon
Answer: the transmitting ring of the charging pad and the receiving ring of the mobile phone are not aligned and should be aligned
2, ask: how often send out hint sound, the cellular phone didn't charge
Answer: the transmitting ring of the charging pad and the receiving ring of the mobile phone are not aligned and should be aligned
3. Q: why don't you charge the mobile phone after it is picked up and used
A: the wireless receiver detection and protection function is set in the management chip of the charging cabinet. If the wireless receiver is not detected by the charging cabinet within about 6s, the charging cabinet will automatically stop the wireless transmission, and the charging cabinet needs to be started by pressing the button again, and then the wireless transmission can work again
Q: why doesn't a blue indicator charge when it's on or shining
Answer: this is a reminder that the charger has run out of power. You need to charge the charger and use it after charging
Note: the wireless receiver phone case can be used on the bracket, household stand and charging pad, without changing the receiver, and can also be used on the transmitter of other standard products.
A, q: mobile phone charging fault
To understand the problem of mobile phone charging, first understand the technical parameters of the stent
Input parameters of wireless charging bracket:
Rated voltage input range: DC 4.75V-5.25V
Rated input current range: DC 1.5a-2.0a
Note: if the power supply input current of the bracket is less than 1.5a, it will not start or stop working frequently, and there will be problems like "intermittent charging" or "no charging" or the mobile phone shows "may not support this accessory" and so on.
Problem phenomenon 1, intermittent charging
Problem phenomenon two, do not charge
Problem phenomenon 3, mobile phone display "may not support this accessory"
Q1. Whether the input car charger head/charger/car USB port you use meets the rated input requirements of the bracket
Q2. Is the car charger head/charger/car USB port that you are using easy to loose and cause poor contact
Q3. Is the car charger head/charger/car USB port plug you are using plugged in properly
A. charger problem: take the iphone charger as an example, the rated output of the iphone charger is DC 5V 1A, and its output current does not meet the power supply requirements of the bracket, so the iphone charger cannot be used as the power supply product of the bracket. The charger rated with standard DC 5V 2A output is used to solve the problem. Taking the DC 5V 2A charger standard for huawei mobile phone as an example, it can ensure the normal start and operation of the bracket.
A car charger head problem: get in the car market filling head there are A lot of output is DC 5 v 1 A, if the above problems the car charger head of output current amounted to less than 1.5 A, then change A standard output rated DC 5 v 2 A car charger head to solve the problem, the other in the process of driving vibration, easy to cause the car charger head loose turbulence note caused by poor contact car charger head of charging problem.
Answer 3: vehicle-mounted USB port problem: if the above charging problem occurs when the bracket connects the vehicle-mounted USB port, the rated output parameters of the vehicle-mounted USB port shall be understood first. If the output parameters of the vehicle-mounted USB port do not meet the input requirements of the bracket, the rated standard DC 5V 2A car charger head power supply shall be changed to solve the problem.
Answer 4. The above three power supply input methods are determined to meet the requirements of the product, or there is a charging problem.
1. Check whether the charging plug of the mobile phone cover is not plugged into the mobile phone charging port or not in place.
2. Mobile phone cover at the receiving end
3: launcher bracket problem. After all the above problems are eliminated, it may be the product itself of 2 and 3, and the product itself shall be returned to the manufacturer for replacement.
> Two, q: bracket easy to fall off the problem
Before understanding the problem of easy falling off of the stent, understand the correct way to install the stent
1. Before the bracket is installed, the installation position shall be determined. The inclined plane or horizontal plane and smooth surface shall be selected for installation, and the irregular surface shall not be installed;
2. After the installation position is determined, wipe the installation position clean with no. 1 wet alcohol cotton first, and dry the water with no. 2 dry alcohol cotton after cleaning. There must be no oil, dust, water and other foreign body residues;
3. Tear off the strong 3M adhesive paper on the base of the support, press the base of the support hard on the installation position, press the support hard to maintain the pressure around 60s, and make sure to keep the pressure around 60s before release;
4. After the bracket base is installed, it can be normally used for wireless charging after waiting for 2h. Do not use it immediately.
5. After the above installation steps are in place as required, the bracket can be guaranteed not to fall off during the use.
A: be sure to follow the detailed installation steps to install the bracket
Q: will the mounting position be damaged if the bracket is removed
Answer: no. Before removing the bracket, heat 3M adhesive to Microsoft state, and then tear it off. Soft adhesive products can be easily removed after heating (heating by hair dryer is available).
Q: will wireless charging affect your phone
Answer: no, this product has a full range of protection on the mobile phone, stable current and voltage protection, full power off charge protection, mobile phone cover with anti-magnetic tape (shielding magnetic field protection) on the mobile phone will not have any interference problems, can be used completely at ease
Q: can the built-in wireless receiver (e.g. Samsung S6/S7) directly use this wireless transmitter bracket
Answer: can't use directly, need to form a complete set special wireless receiving end cellular phone cover use
Q: how fast is the wireless charging speed? Can it be as fast as an ordinary charger?
A: take the iphone 7 as an example. The data from the laboratory test showed that the phone charged at 8-10% in 10 minutes without any operation
6. Q: will the power level drop when using navigation/listening to music/video during charging
Answer: can't, the electric quantity assurance rise don't drop
Q: when charging, will the product be hot?
Answer: it won't get hot. The product USES the special chip for wireless charging of the international famous brand (Texas instruments), and the loss is small and the heat is low when working. Coupled with the design of metal support, it ensures good temperature control
Q: what is the charging efficiency of the product?
Answer: the product USES the international famous brand (Texas instruments) dedicated chip for wireless charging, with high conversion efficiency. The charging efficiency measured in the laboratory is 75%
Q: will the product be radioactive? Is it harmful to human body?
Answer: no, the close range wireless charging products, no harm to human body, safe and assured use
Q: is it easy to drop your mobile phone while driving?
Answer: the product USES the magnet of special quality, the magnet product that has invention patent, magnetic force is strong, in addition the company has done 200 kilometers of driving test, all kinds of road conditions have been tested, did not fall off, the equipment has been used normally in many vehicles of the company for about two years, without falling off
Note: the domestic wireless charging base and wireless charging bracket have the same solution, the same magnetic suction design, which can solve the same problem as the bracket. Wireless charger
1. Description of the charger
1. When the charger is in use, first press the "on" button to open the charger, then align the receiver ring of the mobile phone cover on the transmitter ring of the wireless transmitter of the charger, and then start charging after the wireless charging indicator sound of the charger drops
2. Open the charger and press the switch button; Close the charger and press the switch button twice in quick succession; Turn on the flashlight light, long press the switch button; Turn off the flashlight light, long press the switch button or press the switch button twice quickly; To charge the phone with USB charging cable, you need to press the button to open the charging button (no prompt sound).
3. There are four LED indicators on the charging cabinet, three blue LED indicators and one blue and red LED indicator. The blue light indicates the electric quantity and the red light indicates the wireless emission work
Second, question and answer
1. Q: no charging phenomenon
Answer: the transmitting ring of the charging pad and the receiving ring of the mobile phone are not aligned and should be aligned
2, ask: how often send out hint sound, the cellular phone didn't charge
Answer: the transmitting ring of the charging pad and the receiving ring of the mobile phone are not aligned and should be aligned
3. Q: why don't you charge the mobile phone after it is picked up and used
A: the wireless receiver detection and protection function is set in the management chip of the charging cabinet. If the wireless receiver is not detected by the charging cabinet within about 6s, the charging cabinet will automatically stop the wireless transmission, and the charging cabinet needs to be started by pressing the button again, and then the wireless transmission can work again
Q: why doesn't a blue indicator charge when it's on or shining
Answer: this is a reminder that the charger has run out of power. You need to charge the charger and use it after charging
Note: the wireless receiver phone case can be used on the bracket, household stand and charging pad, without changing the receiver, and can also be used on the transmitter of other standard products.
关闭返回